Making a Home

After returning from Blaise’s intensive in Boston, much of our focus shifted to the “new” old house we had decided to take a chance on and make our own. Much has also been going on with regards to Blaise and his N of 1 trial as well as with Kara and her ever-expanding role in the rare disease community (more on all that later), but our day-to-day life was very much occupied with our massive house renovation. Does every house project turn out so much larger than planned?!

Let’s rewind a bit. After learning of our move to North Carolina in early 2019, Kara had had enough of moving and wanted a home where we could plant our roots, with no intention of moving any time soon. So we took a bit of a leap at the time and found ourselves a wonderful home in a great community that was a short commute to Carl’s workplace. All of this, of course, was before we learned of Blaise’s diagnosis. While the house was great, we couldn’t ignore the fact that the living arrangements were less than ideal for a child with a disability. Our children’s bedrooms were upstairs, which meant a lot of carrying Blaise up and down throughout the day. It didn’t help that those stairs were a bit steep, and even our typically developing son had slipped and fell down a few steps on more than one occasion. We knew this would become an issue at some point, so alas, we started looking at houses all over again.

Just before Thanksgiving 2021 we finally walked into a house that felt like we could really make our own. We made an offer, had it accepted, and immediately started making plans. The “new” house was built in the early 1980’s, and had one owner that entire time. It was single story living, but with an unfinished upstairs that we envisioned as a great guest space or future office. Best of all, it felt like a time capsule from the decade in which it was constructed. Colorful paint, different shades and textures in every room (and I mean EVERY room, including bathrooms), and even chocolate brown matching jacuzzi tub, toilet and bidet in the master bathroom. It needed a major facelift. We found a contractor we felt good about, and came up with an ambitious plan to basically gut the entire house, reconfigure the downstairs to create a more open main living space, and begin work on turning the upstairs into livable space. We intended to do some work ourselves to help contain the budget. And while the project was ongoing we had rented a 2 bedroom apartment to ensure we had plenty of “family time” throughout it all.

We initially planned on the project lasting around 9 months… It took closer to double that. Budget of course increased along with the timeline, which led to us performing more and more work ourselves to help with cost. What was envisioned as some hobby-ish DIY became essentially a second full-time job during the renovation, absorbing much of our evenings, weekends and vacation leave. There was plenty of frustration, exhaustion, sore limbs and blood, sweat and tears. And the apartment life even had our sociable older son wishing he could just have some alone time. But ultimately move-in day arrived and we set about finally turning this house of our dreams that we had agonized over for so long into a reality. And I must say, it turned out pretty darn great. Walking around the house on a day-to-day basis it’s hard not to take pride in so many little details that we dreamt and brought to life. I think there’s a bit of each of us built into the house, and Blaise is certainly no exception. A few such details include a below-counter microwave drawer, ovens with side-open doors that allow easy access, a curbless (aka walk-in) shower and wet room that can accommodate a wheelchair if needed, or the extra-tall baseboard to protect our walls from Blaise’s various walking devices. We couldn’t be happier with the end result and couldn’t be more proud of the work we put in to making it so.

Before…

After…

Along the Way…

Street Parking

Having a sweet home gym has been a dream of ours for as long as we can remember. Throughout the years we accumulated a fair bit of workout equipment, but always longed for the day that we could have a truly dedicated workout space. When we finally moved into our own house (no more apartments or rentals!), making our gym a reality was a top priority. Our garage was a prime candidate for creating such a space. As a visual, here’s what we were starting with.

Not being too keen on working out on a concrete floor, we installed some rubber floor mats before our garage became too cluttered. We had used various flooring options previously; foam tiles, stalls mats, etc. Those options didn’t sound like a good fit for our space, so we gravitated towards rubber rolls. They arrived on a pallet, and were surprisingly easy to install once you maneuvered the rolls into position.

Next came an update to the walls. The existing cinder block was a little more spartan than we wanted the space to feel. We’d seen some people do neat things with old rusted tin, so we found a local site selling their used tin cheap. A quick family road trip later, and we had another project.

The tin needed to be cut to size to fit the height of the cinder block, which was easier in theory than it was in practice, as the garage floor slopes down towards the drive requiring each piece from the back of the garage to the front to be cut at a different height and at a slight angle. We also didn’t want the rust from the tin coming off when our kids inevitably ran into them with their bikes or kicked them with a soccer ball, so we scrubbed down each piece and then sprayed a clear coat on each before installing them. The cinder block also stuck out a few inches from the wall, so we decided to install a wood ledge overtop to hide the cinder block, as well as cover any sharp edges from the cut tin.

The final update to our garage was to increase the height of our garage doors to take advantage of the 14-foot ceilings. This was one project we didn’t want to attempt ourselves, but we were very pleased with the outcome. Here’s a before and after.

The only thing missing now was the centerpiece of our gym: the power rack. After a fair amount of research, we settled on Sorinex for making the power rack of our dreams. They make incredible equipment, have some very creative attachments for their line of racks and rigs, and being located in Lexington, SC they are fairly local to us. I got connected with Shedrick, and hence began a several month-long process of exchanging ideas and checking quotes for various setups. We seriously exchanged dozens of emails and phone calls before we settled on the final build.

Then the toughest part… waiting for it to arrive. As it so happened, our family was quite busy between the time we placed the order for the Sorinex rack to the time it arrived. The day of arrival was still highly anticipated. As luck would have it, Kara happened to catch the attention of a worker from a nearby construction site, who kindly unloaded the pallets for us using his forklift. I have no idea how we would have done it otherwise. This thing was MASSIVE. It took hours just to unpack and unload it all.

The end product exceeded our expectations.

We really couldn’t be happier with how it turned out. Shedrick and the Sorinex team did an amazing job taking our vision and turning it into a reality. Every step of the way their commitment to their product and their customer service was top notch. There were a couple relatively minor discrepancies between what we had ordered and what arrived with the shipment, and without fail all issues were resolved quickly and without any hesitation, further reinforcing our decision to go with Sorinex. Our garage gym has quickly become a space for our entire family to enjoy each other’s company. While Mom and Dad work out, V and Blaise see what mischief they can get into, or try to emulate their parents. This is undoubtedly the start of many fond family memories… and hopefully some sweet gains to go with it. 😉